HME 46-3S

Diadema ATC con micrófono y audífonos abiertos.
Artículo Nr. 502592

Descripción General

La HME 46 es una diadema para piloto con micrófono y audífonos abiertos sumamente ligera y confortable. Es ideal para el control de tráfico aéreo y está equipada con ActiveGard™, que protege a los controladores contra los efectos de los aumentos súbitos en el nivel de sonido.


  • Extremadamente ligera.

  • Comodidad insuperable gracias a su diadema patentada de ajuste automático de dos piezas y sus suaves almohadillas para el oído.

  • Audífono que se puede girar para escuchar de un solo lado.

  • Flexible brazo de micrófono que se puede usar del lado izquierdo o derecho.

  • Micrófono de condensador con compensación de ruido que garantiza una excelente transmisión de voz.

  • Cable de un solo lado de 1.85 m de largo que se puede cambiar fácilmente de lado.

  • También está disponible con PTT

  • Sistema ActiveGard™ que protege a los usuarios contra los efectos de los aumentos súbitos en el nivel de sonido.

Qué hay en la caja?

  • 1 Diadema HME 46
  • 1 Clip para cable
  • 1 Pantalla contra viento y "popeo"
  • 1 Manual del usuario

Información Técnica

  • Color
  • Impedancia
    300 Ohm per system
  • Respuesta de (audio) frecuencia (Micrófono )
    100 - 12.000 Hz
  • Principio transductor (micrófono)
    micrófono de electreto con compensación de ruido - BKE 46
  • Respuesta de (audio) frecuencia (audífonos)
    20 - 14.000 Hz
  • Característica SPL
    92 dB SPL (1 kHz, 1 mW) / 83 dB SPL (1 kHz, 1 V)
  • THD, distorsión armónica total
    < 1 % a 98 dB SPL (350 - 3.000 Hz)
  • Presión de contacto
    ~ 3 N
  • Acoplamiento al oido
    supraaural, abierto
  • Cable de conexión
    cable redondo de un solo lado, 1,85 m, puntas abiertas
  • Principio del transductor
    dinámico, cerrado
  • Peso
    sin cable: ~ 110 g
  • Impedancia terminal min.
    150 - 2200 Ω
  • Rango de temperatura (almacenaje)
    -55 °C - +70 °C
  • Rango de temperatura (en servicio)
    -15 °C - +55 °C
  • Voltaje de salida
    800 mV -2dB a 114 dB SPL, 80 mV/PA (ajustable de 17 a 100 mV/Pa)
  • Voltaje de operación (autónomo)
    8 - 16 V DC


  • What are NRR (Noise Reduction Ratings) for a headset?

    NRR (Noise Reduction Ratings) is a rating of the passive reduction of a headset and this is by a set standard (ANSI).

    However there are no present standards for measuring ANR (Active Noise Reduction). Each Manufacturer uses their own standards. Sennheiser uses the standards and results of an independent laboratory that is accredited by the National Institute of Standards and Technology. One should be very careful in assuming that all manufacturers use these results in a fair and unbiased way.

    HME 46-3S ( #502592 )
  • Which accessories come with my ATC/C3 headset purchase?

    Your purchase of a Sennheiser ATC/C3 headset will include a windscreen, clip, bag, and manufacturer certificates.

    HME 46-3S ( #502592 )
  • Why is it a good idea to have a mic gain adjustment on your microphone?

    The microphone gain adjustment on a microphone gives the technician the ability to make adjustments for minor anomalies that may occur. While the microphone may work fine often a small adjustment may make a big difference in the total performance of the microphone.

    HME 46-3S ( #502592 )
  • Active Noise Cancellation

    Active noise cancellation is the reduction of noise, particular in the low frequency range, by using active noise compensation electronic circuitry. Active noise cancellation is measured in decibels (dB).

    HME 46-3S ( #502592 )
  • Caliper Pressure (Contact Pressure)

    Caliper Pressure (sometimes referred to as Contact Pressure) is the amount of force applied to the sides of the head while wearing headphones. Caliper pressure is measured in Newton’s (N) and could range from 1.6 N (loose fit) to 10 N (snug fit).

    A tight coupling between the headphone and the ear is necessary in order to maximize passive attenuation however too much pressure can make the headphone uncomfortable to wear for long periods of time. 

    HME 46-3S ( #502592 )
  • Condenser Microphone (Electret Microphone)

    A CONDENSER or ELECTRET microphone is one that is based on an electrically charged diaphragm (or back plate) assembly which forms a sound-sensitive capacitor.

    On a condenser or electret microphone a very thin metal or metal coated-plastic diaphragm is mounted just in front of a ridged metal or metal-coated-ceramic back plate. This assembly is known as a capacitor (condenser) which has the ability to store a charge or voltage. When the element is charged an electrical field is created between the diaphragm and the back plate proportional to the spacing between them. Sound waves vibrate the diaphragm and it is the vibration of this spacing due to the motion of the diaphragm relative to the back plate that produces the electrical signal corresponding to the sound picked up by a condenser microphone. 

    The construction of a condenser microphone must include some provision for maintaining the electrical charge or polarizing voltage.

    NOTE: An Electret condenser microphone has a permanent charge maintained by a special material (Electret) deposited on the back plate or on the diaphragm.

    HME 46-3S ( #502592 )
  • Diaphragm

    The diaphragm is a  thin membrane in a microphone which moves in response to sound waves.

    HME 46-3S ( #502592 )
  • Gain

    Gain is the amount of increase in audio signal strength. Gain is often expressed in decibels (dB).

    HME 46-3S ( #502592 )
  • Microphone Gain Control

    Microphone Gain Control is a  level control on a microphone preamplifier that sets gain and is used to prevent overload of a preamplifier.

    HME 46-3S ( #502592 )
  • Output Voltage

    Output Voltage is similar to sensitivity except it takes into account additional electronics used to amplify the signal. This is typically measured over a range of frequencies and will include the term + or - 3 dB. Rather than using 1 Pascal this specification may also include the input level used such as 114 dB at a distance of 6 mm.

    HME 46-3S ( #502592 )
  • Passive Attenuation

    Passive attenuation is the ability of the headset to reduce the ambient noise level by merely wearing the headset without the aid of any electronic assistance (ie: active noise compensation circuitry). Passive attenuation is measured in decibels (dB).

    HME 46-3S ( #502592 )
  • Pre-Amp

    A Pre-Amp is a low-noise amplifier designed to take a low-level signal (such as that from a microphone) and bring it up to normal line level.

    HME 46-3S ( #502592 )
  • Sensitivity

    Sensitivity  is a measurement of how much voltage is produced by a microphone for a specific measured input (1 Pascal). Sensitivity is measured in micro volts (uV) or millivolts (mV).

    A typical rating for a dynamic microphone would be 1 mV. A typical rating for an Electret microphone would be 3.5 to 10 mV A typical rating for an Electret with amplifier would be 170 mV. 

    The higher the number the stronger the signal produced by the microphone.

    HME 46-3S ( #502592 )
  • XLR-3 Connector

    The XLR-3 Connector is a single connector that can be used in place of the PJ055 headphone and the PJ068 microphone plugs on some Sennheiser headsets.

    Pin 5 of this plug can also be used to provide aircraft power for the NoiseGard power supply on some Sennheiser headsets.

    HME 46-3S ( #502592 )
  • XLR-5 Connector

    The XLR-5 connector is a single connector that can be used in place of the PJ055 headphone and the PJ068 microphone plugs on some Sennheiser headsets.

    Pin 5 of this plug can also be used to provide aircraft power for the NoiseGard power supply on some Sennheiser headsets.

    HME 46-3S ( #502592 )


  • Instrucciones de uso
    • Instruction Manual - HMD 46 / HME 46 (1.5 MB) Descargas

  • Misc
    • HMD46_HME46_HME46-3S_515803_0610_ES_INT.pdf (450 KB) Descargas

  • Folleto digital
  • Declaración UE de conformidad
    • EU Declaration of Conformity HME_46_series (210 KB) Descargas