MobileConnect Station

The MobileConnect Station is the “audio-to-network bridge" that picks up your room audio and provides a high quality audio stream for your WiFi network. Each Station can support up to 100 clients in up to 2 different streaming channels.

Artículo Nr. 508895

Descripción General

As the hardware component of MobileConnect, the MobileConnect Station picks up your room audio from up to two different audio sources, for example handheld microphones, bodypacks or ceiling microphones. Its powerful DSP cores then provide up to two separate mono or stereo streams that can be received by iOS and Android devices anywhere in the room using WiFi. Single MobileConnect Stations can be run and administered in the so-called Standalone Mode using a local web interface. When using multiple Stations, the MobileConnect Manager can be used as the single point of administration for all MobileConnect Stations, making it an extremely scalable system.

Características

2 separate streaming channels per station
100 simultaneous clients per station
2 integration modes (Standalone and Manager Mode)
Mono and stereo audio available
Power over Ethernet (PoE)
Dante
XLR

Qué hay en la caja?

Sennheiser MobileConnect Station
Housing feet
Quick guide
Safety guide

Información Técnica

Latencia

50-70 ms (Depending on network infrastructure and mobile device)
Frecuencia de muestreo

48 kHz
Bitrate

128 kbps
Respuesta de (audio) frecuencia

40 Hz - 20 kHz
Peso

approx. 970 g
Entrada de audio

- 2x 3-pin sockets (suitable for XLR-3-F)

- 2x Dante™ Digital Audio Network sockets (RJ-45)

- 2x 3-pin sockets (suitable for XLR-3-M)
Consumo de energía

Max. 10 W
Relación señal-ruido

101 dB (A)
Impedancia de entrada

10 kΩ
Voltaje

PoE IEEE 802.3af Class 3 (Supply voltage)
Conector de red

- 1x RJ-45 Control/PoE/Streaming - 1x RJ-45 Control
Rango de temperatura

Operation: 0 °C to +40 °C (32 °F to 104 °F)

Storage: -10 °C to +60 ° C (14 °F to 140 °F)
Dimensiones

½ 19" housing approx. 212 x 168 x 43 mm (8.4" x 6.6" x 1.7")